Dk7740c3 Type Electric Discharge Wire Cutting Machine

DK7740C3 type electric discharge wire cutting machine
DK7740C3 wire electric discharge machine is controlled by a single-chip microcomputer, and has a lifting frame and a taper. Cutting is performed by high-frequency pulse discharge between the electrode wire and the workpiece.
This machine is suitable for processing molds and parts with complex shapes such as various carbon steels, alloy steels and hard alloys.

Horizontal travel of workbench (mm): 400
Table longitudinal travel (mm): 630
The maximum load capacity of the workbench (Kg): 400
The maximum cutting thickness of the workpiece (mm): 300
Workpiece maximum cutting taper (°): 3
Electrode wire diameter (mm): 0.11~0.20
Wire speed (adjustable) (m/s): 11
Processing surface roughness (um): Ra≤3.2 (material removal rate is greater than 20mm/min, and the thickness of the assessed workpiece is not greater than 40mm)
Dimensions of working fluid tank (mm): 580x 300x 620
Working fluid tank weight (Kg): 25
Working fluid tank capacity (L): 50
Machine tool dimensions (mm): 1800 (length) X 1650 (width) X 2220 (height)
Machine weight (Kg): 2000
Power supply: 3φ, 380V + 10%, 50Hz
Machine tool power consumption (Kw): 2.8
Working environment: temperature 0~40°C, relative humidity 40%~80%, air pressure 86~106Kpa
Electrical factory standard configuration: KY wire cutting controller